Production Rate:	600-1000 sq. feet an hour at 1/2" deep
	Maximum Depth:	1"
	Minimum Depth:	1/8"
	Floor Profile:	1/16-1/8" high corn rows
	Applications:	Removal greater than 1/2" deep of Epoxy, Thin-set, Mortar, Glue, and Concrete
	Accuracy:	1/16"
	Cutting Path:	6"

This is the smaller version of the 2500.It’s design and shape are identical, with the exception of a slightly smaller body. The main advantage of running this machine is its ability to operate with any standard flow mini skid steer.Because it doesn’t require a high flow host machine, you can fit it into smaller spaces.As with the 2500, this machine is used primarily for heavy removal of coatings thicker than 1/8”. The Power Profiler 1500 is accurate to within 1/20^th of an inch and can cut as deep as 1 inch per pass.It was built to cut concrete floors flat quickly, and will also cut through epoxy coatings (like trowel down), ceramic & quarry tile, and reinforced concrete up to 20,000 psi.When cutting half an inch deep, average production rates of 600 to 1,000 square feet per hour should be expected.