Production Rate: |
600-1000 sq. feet an hour at 1/2" deep |
Maximum Depth: |
1" |
Minimum Depth: |
1/8" |
Floor Profile: |
1/16-1/8" high corn rows |
Applications: |
Removal greater than 1/2" deep of Epoxy, Thin-set, Mortar, Glue, and Concrete |
Accuracy: |
1/16" |
Cutting Path: |
6" |
This is the smaller version of the 2500.It’s design and shape are identical, with the
exception of a slightly smaller body. The main advantage of running this
machine is its ability to operate with any standard flow mini skid steer.Because it doesn’t require a high flow host
machine, you can fit it into smaller spaces.As with the 2500, this machine is used primarily for heavy removal of
coatings thicker than 1/8”. The Power Profiler 1500 is accurate to within 1/20th
of an inch and can cut as deep as 1 inch per pass.It was built to cut concrete floors flat
quickly, and will also cut through epoxy coatings (like trowel down), ceramic
& quarry tile, and reinforced concrete up to 20,000 psi.When cutting half an inch deep, average
production rates of 600 to 1,000 square feet per hour should be expected.
This unit is also perfect for the take-up of
ceramic tile, terrazzo & quarry tile because it can be set to remove 98
percent of the thinset in the first pass WITH the tile. The Power Profiler 1500 will run on any
standard flow mini skid steer with a minimum of 13gpm, and leaves a mild
profile on the floor between 1/8 and 1/16th of an inch high. Dust
free operation is built in and easy to use, when run
with the ProVac.
|
Power Profiler 1500
